Click image to view full size image
Model Number: 23380 / 23382
Brand Name: norelem
Key Specifications/Special Features:
Material: steelVersion: brightNote:Shrink disc to connect a hollow shaft to a shaftThey are attached to the outside of the hub and generate a tension on the hub by reducing its internal diameter over tapered surfacesThis creates a press fit between the hub and shaftThey are suitable for static, dynamic and shock loads- For extremely high torques- No axial shaft/hub offset when assembling- Self-centringAssembly:Remove existing transportation locks
Clean and lightly oil shaft, internal and external hub diameters
Do not use MoS2 or grease
Slide shrink disc onto hub
Then slide unit (shrink disc/hub) onto shaft and position correctly
Gently tighten clamping screws one after the other by hand
Then use a torque wrench to tighten the clamping screws one after the other in several increments to the defined tightening torque MS
1st increment approximately 33% MS
2nd increment approximately 66% MS
3rd increment 100% MS
Clean and lightly oil shaft, internal and external hub diameters
Do not use MoS2 or grease
Slide shrink disc onto hub
Then slide unit (shrink disc/hub) onto shaft and position correctly
Gently tighten clamping screws one after the other by hand
Then use a torque wrench to tighten the clamping screws one after the other in several increments to the defined tightening torque MS
1st increment approximately 33% MS
2nd increment approximately 66% MS
3rd increment 100% MS
| Attribute label | Attribute value |
| Material | Steel |
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe